How do I connect a ceiling fan/light when the power feed is at the ceiling box? - ceiling fan power limiter
A single cable to the wall switch is black, red, white and bare, rising to the ceiling box. The box also has branches ceilng Union are linked. What should I do with my fan cable / light you (son 4), in black, white, blue and green. My switch has wiring (son 4) black cord, white, red and bare (son 3) black, white and bare, that the powers of the box and ceiling outlets. So the house in the area above the ceiling fan is connected.
Tuesday, February 9, 2010
Ceiling Fan Power Limiter How Do I Connect A Ceiling Fan/light When The Power Feed Is At The Ceiling Box?
Subscribe to:
Post Comments (Atom)
2 comments:
Description Very good! If a single cable in the switch box with a red and black wire is hot and red, the switch leg (a so-called rise), and is the common white / neutral. Attach the red and black together for change, mother, and whites and conclude. In the ceiling box black wire feeding the switch so that it attached to a hot climate (and should be done, but mostly black) and Red Hots is the ceiling fan black and blue and white attached white and green to green. In other words, if it's just a switch on the wall! When both switches then it is a little different. What is happening here is that the fan switch allows two, but not mandatory. The black wire is usually for the fan motor and blue (slightly smaller) is responsible for lighting (if not, then there is no light blue wire that is for future extension of light.)
If the white wire is in the brw to power in the ceiling box, stand, then it is the power to change. As the son of black and red, the two legs and a fan meet-switch. Of course it is possible that the order in two ways reorganization RSF WBR. If the cable has no ground wire, may be forced to ignore the green earth / Bare too, unless you have metal boxes can be connected to the plot, braids, only if you use a metal conduit or BX cable less metal. It is unlikely that the neutral running a deadlock breaker. It is even more likely if the fan housing is rated `` fan.
You can tell by the # 10 screws used to mount the fan or belt attachment. If one then in a fan is the fan box should be minimal.
Post a Comment